Wholesale Suppliers for Electrical Supplies, Lighting, Heating, Motion Control and Tools Account Log-In | Create New Account | Shopping Cart | Contact Us  

Cust. Serv. Hrs.: M-F 6:30AM-4:45PM - Sat. 7AM-12PM
Voice: 610.825.1888 Fax: 610.825.6482
Toll Free: 1.800.575.4960
Q-Mark heaters, space heaters, baseboard heaters
WINTER WARMTH AND COMFORT FOR GARAGES AND WORKSHOPS
Q-MARK HEATERS

Q-Mark has electric heat for any situation, including
explosion proof heaters, "air curtains", and custom heat products.
Click here for all pricing and to order QMark products on-line!

Radiant Heaters · Contractor Heaters · Electric Baseboard Heaters
Fan-Forced Wall Heaters · Ceiling-Wall Fan Forced Heaters · Unit Heaters


Radiant plug-in under desk heaters THE QMARK RADIANT PLUG-IN 202SL HEATER PAYS FOR ITSELF. JUST 170 WATTS VS. AVG. OF 1,500 WATTS FOR FAN FORCED SPACE HEATERS
Ideal, economical, safe way to provide warmth for cold secretaries, bank tellers, receptionists, cashiers, accountants, architects, engineers - in fact, anyone who sits at a desk, counter or table whether at work or at home! The 200 Series gives you personalized warmth just where it's needed. This amazing heater costs just one or two cents per hour to operate...based on your local electricity rate.

A slim, lightweight off-white panel designed to fit out of the way, mounting easily to the inside of the desk well or standing on it's own feet. The heater is controlled with it's own On/Off switch with indicator light or optional portable thermostat.


QMARK CONTRACTOR HEATER

For construction job sites, commercial workshops and other large unheated areas

Q-Mark Contractor Heater
  • Built-in thermostat
  • Safety high temperature limit
  • Industrial finger proof, steel intake and discharge grilles
  • Steel spiral fin brazed to metal sheathed element for maximum heat transfer
  • 6' Heavy duty cord
  • Built-in handle/cord storage
  • Permanently lubricated motor
  • LFC562 has continuous fan feature
  • Red finish
  • Portable, quiet

QMARK ELECTRIC BASEBOARD HEATERs - HYDRONIC

Q-Mark Electric Hydronic Baseboard Heater
  • Clean, quiet operation, without the noise of a traditional hot water piping system and the noisy blower and dirt of forced-air systems.
  • Efficient and economical, individual room control permits heating only in desired areas. Or use as total electric heat source.
  • Low unit surface temperatures, natural convection, and large heating fin areas deliver a steady, uniform comfort level in room
  • Sheathed electric heating element is completely submerged in heat transfer fluid totally sealed in a copper tube spanning the length of the heater. Heat is transferred evenly across the entire length of the heater. Even after thermostat is turned off, soft warmth continues to radiate because of maximum heat retention of the hydronic element.
  • Large wiring component is accessible from either end or front, enabling rapid, easy hookup.
  • Dual ratings allow six models to cover 35 variations of wattage and voltage. Built-in or remote thermostat (optional). High-temperature shutoff protection.
  • Contemporary styling and neutral color blends with any decor. Just three inches deep, unit mounts flush to wall and flat on wood, tile or carpeted floor.
  • 10-year limited warranty. A decade of maintenance-free performance - guaranteed.

QMARK FAN-FORCED WALL HEATER

Q-MARK Fan-Forced Wall Heater
  • Ideal for bedrooms, dens, basements, converted attics, breezeways, garages, bathrooms, small offices, workshops, and other similar areas. Also adaptable to multiple installations in somewhat larger or odd shaped rooms.
  • Multi-wattage capability. With three models providing a wattage range from 375 (1280 Btu/hr) watts to 2400 watts (8190 Btu/hr), the GFR is a very versatile heater with a wattage output to satisfy a wide range of application.
  • The tangential blower and the impedance protected, permanently lubricated motor are trouble-free and whisper quiet.
  • Each unit comes equipped with an automatic overtemperature protector that guards against overheating. Also standard is a pilot light that indicates the protector has operated. Q-MARK Fan-Forced Wall Heater
  • The heating element features heavy gauge steel fins which are blazed to low watt density steel sheathed tubular elements in a uniform grid pattern.
  • Two mounting brackets are provided with each unit to aid in installation into new construction. When utilized, they correctly position and level the black box in the stud wall.
  • The units can be operated by either a built-in or wall mounted, single pole or double pole, line voltage thermostat.
  • A separate black box, fan deck and front cover makes installation simple and quick. The slide in fan deck locks into place without the use of fasteners.

QMARK Ceiling-Wall Fan Forced Heaters

Q-Mark Ceiling-Wall Fan Forced Heater
  • Heating element is heavy duty steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area
  • Fan Delay: On a call for heat, element is energized but fan is delayed until element is warm, eliminating the circulation of cold air during startup. When the thermostat is satisfied, the element is de-energized, but the fan continues until all heated air is discharged providing longer component life and higher comfort level.
  • Designed for easy installation. Heater is mounted prior to wiring. Both hands are free to make field connections in roomy compartment.
  • Motor is totally enclosed, impedance protected, with permanently lubricated bearings.
  • Airflow system maximizes air volume at minimum noise level; 65 CFM
  • Rugged 18 ga. louvered steel grille creates downflow air pattern.
  • This heater is designed for installation in 2' x 4' or larger wall or ceiling sections using the wall box provided. The heater may also be surface mounted to any ceiling or wall by using the Surface Mounting Frame, sold separately.
  • The heater may be wired with standard building wire with standard building wire.
  • A hole plug is provided for tamper resistant installations.
  • Disconnect Switch: Optional field installed power disconnect switch available for added safety during maintenance.
  • Neutral grey baked-on enamel grille.

QMARK Unit Heaters

Q-Mark Unit Heater
  • One unit mounts either horizontally or vertically. Totally versatile. For factories, warehouse, garages, stores, shipping rooms, power stations, aircraft hangars. Can be used for primary, supplementary, sopt, or dual-system heating.
  • Wide range of optional control kits are field installable, increasing the MUM adaptability to the specification market.
  • Forced air unit heater with 10 power ratings; form 3 Kw to 50 Kw heating output; 208, 240, 277, and 480V. 10,230 to 170,500 BTU/hr.
  • 32 compatible models (no need to try to assemble a heating system from 70 or 80 models.
  • Heavy gauge die-formed steel housing. Two-toned, smartly styled.
  • Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation.
  • Specially designed venturi outlet to meet that added throw as required in vertical position.
  • Branch circuit fusing (when required)
  • Completely enclosed fan motor
  • 1 - or - 3 phase wiring on 5 through 10 Kw 208/240 V and 15 Kw 208V units (field interchangeable)
  • Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation.
  • 24V control transformer standard on most models, providing a safer and more accurate means of temperature control. 3 Kw and 5 Kw, 208-277V, have line voltage controls as standard. (manual reset protection available on made-to-order basis.)
  • 2-speed fan selector switch (25 to 50 Kw models).
  • Fan delay feature eliminates cold drafts. Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off.
  • Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps.
  • Individually adjustable discharge louvers to control air flow.
  • Choice of optional diffusers for variety of air patterns, maximizing heat concentration and coverage in the vertical position.
  • Meets all UL, NEC, and OSHA requirements.
Click here for pricing and to order QMark Heaters, Baseboard Heaters and Radiant Heaters!


We are adding items regularly. If you don't see the item you are looking for, give us a call. We also have thousands of electrical products in stock that are not listed online.
There are constantly new products becoming available too. If you DO NOT see what you are looking for call 800-575-4960 or contact us by form

Site Info
Customer Service
Company Info
Account Info